 |
 |
|
RIG 1001 |
| |
Ideco H-35 Rambler Rig
300 HP
On 4 axle Self-Propelled Carrier
|
|
| DRAWWORKS |
Ideco H-35 Double Drum with Parmac double 15' hydro-matic brake, Foster Makeup and breakout catheads-Braden hydraulic tugger winch-Powered by Detroit 8V92N diesel engines with Allison automatic transmission |
|
| MAST |
Ideco KM 95-212 95 ft. 212,000 lb on 6 lines - 3½ standpipe with 3" X 45' Kelly hose |
|
| TRAVELING |
Ideco UTD 110 ton unitized block-hook with 3-30" sheaves 1" line - 72" X 1¾" 300 ton weldless bails. |
|
| ROTATING |
Ideco SR 175 rotary table-17½" opening with split master bushing
Ideco TL 120 ton swivel
4¼"X 40' square Kelly
Varco 4-roller drive bushing TIW upper Kelly valve
TWI upper-Kelly valve
|
|
| SUBSTRUCTURE |
Custom 200 ton integrally loads with 16' X 18' floor space - 13' KB measurement with 10' 6" clear height under rotary table. Substructure and walk section are unitized and wheel mounted including hydraulic pipe handling accessories. |
|
| PUMPS |
1-600 Wilson Pump Powered by 12V71 Detroit Diesel Engine 550 HP 5½" Liners 14" Stroke |
|
| MUD SYSTEM |
2-180 barrel capacity steel mud pits, by-pass troughing, top mounted walkway with safety railings, lighting, Harrisburg 10" single cone DeSander. |
|
| WELL CONTROL EQUIPMENT |
Cameron 11" 3000 lb Type "A" annular preventer
Shaffer 11", 5,000 psi LXT Rm BOP
Cameron/Payne 3,000 psi 80 gal accumulator with 4 stations, one 5 HP electric charge pump, air pump
|
|
| DRILLING STRING |
3 ea 8 X 2¼ drill collars-6 5/8 reg. threads
20 ea 6¼ X 2¼ drill collars-4½ XH threads
5000'5" FH Grade E 14.40 lb range 2DP in tubs 4" FH threads
|
|
| GENERATOR ACCUMULATOR, FUEL TRAILER |
3,000 gal diesel tank
235 KW Cummings 855 and power panel
80 gal accumulator Koomey
Oil bins and spare parts storage
|
|
| DOG HOUSE, CHANGE ROOM |
8' X 40' Van equipped with tool room, knowledge box Record-O-Graph, drilling recorder 2 pen, crew change room and lockers. |
|
| WATER STORAGE |
500 bbl single axle frac tank divided into 25 bbl compartments |
|
| AUXILLIARY EQUIPMENT |
Wooley Type "B" rotary tongs 3½ to 13 3/8 heads µ
15 thru 10¼ csg tools
BJ Type CTS hydraulic tongs 2 3/8 thru 10¾ heads
|